Blue BA Hydraulic Repair Kit Cylinder Rod Seal For Construction

BA rod seal hydraulic cylinder seal

Countermeasures for oil leakage caused by loose oil seal
1. Master the basic knowledge of identifying counterfeit and inferior products, and choose high-quality, standard oil seals.
2. During installation, if the outer surface of the shaft diameter has low roughness or defects such as rust spots, corrosion, burrs, etc., polish it smooth with fine emery cloth or oilstone; apply clean engine oil or grease to the oil seal lip or the corresponding position of the shaft diameter. Apply sealant to the outer ring of the oil seal, and wrap the keyway on the shaft with hard paper to avoid scratching the oil seal lip. Use a special tool to rotate the oil seal inward and press it in. Do not smash or punch hard to prevent the oil seal from deforming. Or the spring is squeezed out and becomes ineffective; if the lip is flanged, the spring falls off and the oil seal is skewed, it must be removed and reinstalled. It should be noted that when the shaft diameter is not worn and the oil seal spring has sufficient elasticity, do not tighten the inner spring without authorization.
3. Oil seals used in machinery generally have harsh working conditions, large environmental temperature differences, a lot of dust, and frequent machine vibrations that cause the stress conditions of the machine parts to constantly change. Frequent inspection, maintenance, and maintenance are required.
4. If the shaft diameter and bearings are seriously worn; the oil seal rubber is aging or the spring fails, etc., repair and replace corresponding parts should be carried out in time.
5. Troubleshoot abnormally heating components or assemblies in a timely manner; avoid mechanical overspeeding and overload operation to prevent oil seal lip temperature from rising, rubber aging, and early lip wear.
6. Check the engine oil level frequently. If there are too many impurities in the engine oil, or if there are alloy powder or metal iron filings, replace the engine oil with new one. The brand and quality of the engine oil you replace must meet the requirements of the season. It is recommended to add Maitra Super Sealer & Lubricant to the engine oil. It is an excellent gearbox additive that can form a film of inert material on the components. It can slow down the leakage of the oil seal and extend the use of the oil seal gear. life, and can also reduce the noise of the gearbox. The use of this Maitra super sealing lubricant will not cause pollution or deterioration of the oil.

Why choose us?

1, Do you still find a company which can provide one-stop solution to your problem? Why not choose us?

2, Do you still find a company which could provide high-quality products with comparative price? How about choose us?

3, Do you still find a company which is glad to to take good service to make you feel at home? Why do not take us into consideration?

4, Do you have a high requirements for products, ant hope it could have large stock, short delivery time and long warranty period? Welcome to our company and choose products that meet your needs.

5, As a professional company in this industry, we have accurate data to follow the excavator brand part number inquiry, guarantees the product’s correct rate.You can trust us because we can find parts for nearly all your needs.